Criticare 506N3 Series

criticare_506_np3_vital_signs_monitor_0

$1,895.00

Spot-check or continuously monitor three critical parameters with a single monitor. Designed to travel everywhere you do, the VitalCareTM 506N3 Series with integrated carrying handle attaches quickly and easily to roll stands. Available in multiple configurations, the VitalCare provides maximum versatility and cost-effectiveness.

NIBP, SPo2, Temperature

Out of stock

SKU: 506n3 Category:

Product Description

Criticare 506N3

Overview

Spot-check or continuously monitor three critical parameters with a single monitor. Designed to travel everywhere you do, the Criticare 506N3 Series with integrated carrying handle attaches quickly and easily to roll stands. Available in multiple configurations, the VitalCare provides maximum versatility and cost-effectiveness.

Smart battery management allows up to 100 non-invasive blood pressure measurements on a single battery charge. With a compact design that is easily set up for spot-checks or continuous monitoring, the monitor adapts readily to hospital, clinic and transport requirements.

Features

  • ComfortCuff® NIBP measures on-inflation for faster, more comfortable readings.
  • Choice of CSI’s DOX® or Nellcor OxiMax® pulse oximetry.
  • Audible and visual alarms are adjustable for use in continuous monitoring.
  • Large responsive keys for fast spot-checks with easy to clean membrane keypad.
  • Accomodates all patient types from adult to neonate.
  • Multi-patient trend memory.
  • Rechargeable battery with direct AC power.
  • Optional FILAC or Alaris TurboTemp® predictive temperature for quick, accurate measurements.
  • Optional integrated printer for on-demand, automatic interval, trends or multipatient reports.
NIBP (NON-INVASIVE BLOOD PRESSURE)
Technique: Oscillometric measure upon inflation
Measurement Cycle: < 40 sec. typical
STAT Mode: 5 min. of continuous measurements
Automatic Measurement: 1, 2, 3, 5, 10, 15, 30, 45, 60 min.; 2, 4 hrs; STAT
Inflation Pressure Range: Adult: 30 to 300 mmHg; Pediatric: 30 to 150 mmHg; Neonate: 20 to 150 mmHg
Resolution: 1 mmHg
ransducer Accuracy: ±2 mmHg or ±2% of reading, whichever is greater over full range
Clinical Accuracy: Complies with AMI SP-10:2002

 

PULSE OXIMETRY
Range: 1% to 99%
Resolution: 1%
Accuracy (DOX only): 70% to 99% range: ±2%; 50% to 69% range: ±3%; < 49%: unspecified
Accuracy (OxiMax only): 70% to 99% range: ±2% < 69%: unspecified
Method: Dual wavelength LED
Audio: Tone with each detected pulse; pitch varies with saturation

 

HEART RATE (PULSE)
Range: 20 to 300 bpm
Accuracy (DOX Only): ±1 bpm or ±1% of reading, whichever is greater; unspecified for <30 or >240 bpm
Accuracy (OxiMax Only): ±2 bpm or ±1% of reading, whichever is greater; unspecified for <30 or >240 bpm
Update Time: 1 sec.
Resolution: 1 bpm
Pulse Volume: 10 levels or Off

 

TEMPERATURE (TURBOTEMP)
Type: TurboTemp
Method: Predictive or continuous
Channels: 1
Predictive Mode Range: 96 to 106 degrees F (35.6 to 41.1 degrees C)
Continuous Mode Range: 80 to 106 degrees F (26.7 to 41.1 degrees C)
Accuracy: ±0.2 degrees F (±0.1 degrees C; measured in calibrated water bath while in continuous mode
Resolution: ±0.1 degrees F or ±0.1 degrees C
Response Time: 10 seconds typical (oral)

 

TEMPERATURE (FILAC)
Method: Predictive of Continuous
Channels: 1
Range: 86° to 109.4F (30° to 43°C
Accuracy (Continuous): ±0.2°F (±0.1°C)
Accuracy: (Predictive):  ±0.2°F (±0.1°C) (Compliant with EN 12470-3 and ASTM E1112:98)
Resolution: ±0.1°F (±0.1°C)
Predictive Response Time: 10 sec. typical

 

ALARMS
Indication: Audible, Visual
Volume: 10 levels or OFF
Silence: Yes; 2 minutes or permanent

 

TRENDS
Memory: Last 24 hours
Parameters: NIBP, SpO2, pulse rate, temperature
Report Types: Single patient or multi-patient; selectable formats

 

DISPLAY
Type: LED
Parameters: SpO2, pulse rate, NIBP, temperature, pulse bar
Status: Alarm Silence; Sensor; Low Battery; External Power; Patient Size
Text: Alphanumeric LCD
Languages: English, French, German, Italian, Spanish, Portuguese, Dutch and Danish

 

SYSTEM OUTPUTS
COM Port: Serial, RS232 compatible

 

PRINTER (OPTIONAL)
Type: Thermal array
Tabular Mode: 1 to 60 minute intervals; 2 to 24 intervals; auto on BP; auto on alarm; off

 

PHYSICAL PROPERTIES
Weight: Base unit with battery: 6.95 lbs (3.1 kg)
Size: 8.7 in (H) x 7.1 in (W) x 6.5 in (D); 22 cm (H) x 18 cm (W) x 16.5 cm (D)

 

POWER REQUIREMENTS
Voltage: 100 to 240 VAC; 50/60 Hz
Battery: 1 sealed lead acid
Battery Life: 8.0 hours, typical
Recharge Time: 6.5 hours, typical

 

ENVIRONMENTAL
Operating Temperature: 32° to 113°F (0° to 45°C)
Storage Temperature: 23° to 122°F (-5° to 50°C)
Operating Humidity: 15% to 90%, noncondensing

 

CLASSIFICATION
Electrical Protection: Class I Equipment
Degree of Protection: Type CF, Defibrillator-proof
Protection Against Ingress: IPX1, Drip-proof Equipment

 

Additional Information

Weight 12 lbs
Dimensions 12 x 12 x 20 in